Fire fighting floating boat application place

At present, there are many kinds and styles of fire fighting equipment. Among them, the fixed fire pump or the traditional fire pump with internal combustion engine as the main power is not suitable for fire fighting in some special occasions, such as places where fires occur in floods, areas where the geographical location is in the urban-rural junction and municipal fire hydrants are insufficient, but natural rivers and fish ponds are widely distributed. Especially, the traditional fire pump with internal combustion engine as the main power is prone to misfire when the air temperature is low or the personnel are not operating properly, and after long-term use, it will lead to higher temperature of the fuselage or insufficient fuel, which needs to be shut down for cooling or refueling. At the same time, there are many problems such as complex structure, cumbersome operation, difficult movement, high cost and so on. With the rapid development of society and the continuous expansion of city scale, petrochemical industry, high-rise buildings, large shopping malls and entertainment venues are concentrated and increasing day by day, and various disaster-causing factors are also rapidly increasing, so fire safety becomes increasingly important.    

Therefore, it is necessary to propose an improvement scheme for the existing fire pump to meet the needs of fire fighting. Therefore, a floating boat pump structure is formed by the structural fusion of the submersible pump floating device, and the submersible pump can float in the water surface through the floating device, thus ensuring the direct contact of the submersible pump water and realizing natural cooling; When in use, the submersible pump can be operated by directly plugging the power plug into the 220V or 380V socket, thus avoiding the problem that the traditional fire pump with internal combustion engine as the main power is easy to die out or difficult to start. At the same time, the floating device has simple structure, low production cost and installation cost, which is conducive to reducing the cost of the whole floating boat pump. Users can change different types of submersible pumps according to the use needs, thus improving the convenience of use and installation. Further, the water outlet of the submersible pump of this embodiment can be set to a structure that the fire hose can be connected at the factory, and the later modification can also be realized, that is, the water outlet of the submersible pump can be modified to a fire interface that can be connected with the fire hose. In order to ensure the installation effect of the submersible pump in the floating device and improve the performance of the submersible pump, shock absorption blocks or other similar devices are arranged on the bearing plate, and the submersible pump is installed on the bearing plate through the shock absorption blocks.    

In this way, not only the material consumption of the floating device can be saved, but also the floating device can be used to drive the whole pump body to be in a floating state by using the gradual change connecting part, so as to ensure the performance of the floating boat pump. Dongjin fire fighting floating boat pump is small in size, light in weight and simple and quick to operate. The water sources such as ponds, rivers, wells and pools can be directly used, with strong flexibility, large water output, long range and easy maintenance. It is suitable for the fire scene or temporary water intake in towns, villages and fire engines. Only one person can carry, move, place or operate the floating boat pump, which greatly saves the labor cost.